SEA&SEA YS-01 SOLIS Strobe Head
SEA&SEA YS-01 Solis Strobe
The SEA&SEA YS-01 Solis Strobe, the best-selling strobe in its class, has been redesigned to offer improved performance. Featuring DS-TTL II circuitry, this strobe automatically adjusts the light intensity based on the light output from the camera’s onboard flash. With this function, even an inexperienced underwater photographer can intuitively control the desired light level. The strobe also allows you to adjust the light intensity from the programmed standard exposure, making it easy to fine-tune the lighting for your specific needs.
Product Specifications
- Guide Number (ISO 100/m) (land): 20
- Beam Angle: 100° x 100° (with diffuser 110° x 110°)
- Batteries: 4xAA A: 6V Ni-MH: 4.8V
- Number of Flashes: A: 230 Ni-MH (2500mAh): 300
- Recycle Time (Full): A: 2.5 sec. Ni-MH: 1.9 sec.
- Colour Temperature: 5600K
- Colour Temperature w/ Diffuser: 5250K
- Depth Rating: 75m / 250ft
- Dimensions (WxHxD): 7.5cm x 11.1cm x 12.9cm / 3.0in x 4.4in x 5.1in
- Weight: 441g / 14.7oz (without batteries) * Fixing bolt attached
- Underwater Weight: Approx. +60g / 0.35oz (with batteries)
Key Features
- DS-TTL II circuitry adjusts the light intensity automatically based on your camera’s onboard flash.
- Intuitive light level control for adjusting the intensity, allowing easy light manipulation for various conditions.
- Increased light intensity from the target light—40% stronger than previous models—helping to better visualise the strobe’s position.
- Exclusive prism lens delivers a wide 100° x 100° beam angle with ideal flat light distribution, even without the diffuser.
- With the diffuser, the beam angle expands to 110° x 110° and softens the light for more evenly exposed images.
- Pre-flash cancel mode, designed to eliminate pre-flash interference from your camera.
- Customisable light level control with 10 steps, allowing precise adjustments of the Guide Number (GN) from 1 to 20.
- DS-TTL II function for flawless automatic exposure.
- Auto power-off function for energy efficiency.
- Sync cord: Fibre-Optic Cable (required for use).
- Over-pressure relief valve to ensure safe operation under water.
- LED target light for improved strobe positioning.
Important Notes
- A Fibre-Optic Cable is required when using the YS-01 strobe.
- If using the YS-01 with a non-SEA&SEA housing, a Strobe Mask Set may be needed along with the Fibre-Optic Cable.
- For optimal performance, always use genuine SEA&SEA Fibre-Optic Cables. Non-recommended cables may cause issues, especially with TTL auto exposure.
- CAUTION: Do not use non-recommended batteries (such as lithium primary batteries). These can cause battery leakage, overheating, and may even cause the strobe to rupture, leading to personal injury.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
SEA&SEA YS-01 SOLIS Strobe Head
SEA&SEA YS-01 SOLIS Strobe Head
SEA&SEA YS-01 Solis Strobe
The SEA&SEA YS-01 Solis Strobe, the best-selling strobe in its class, has been redesigned to offer improved performance. Featuring DS-TTL II circuitry, this strobe automatically adjusts the light intensity based on the light output from the camera’s onboard flash. With this function, even an inexperienced underwater photographer can intuitively control the desired light level. The strobe also allows you to adjust the light intensity from the programmed standard exposure, making it easy to fine-tune the lighting for your specific needs.
Product Specifications
- Guide Number (ISO 100/m) (land): 20
- Beam Angle: 100° x 100° (with diffuser 110° x 110°)
- Batteries: 4xAA A: 6V Ni-MH: 4.8V
- Number of Flashes: A: 230 Ni-MH (2500mAh): 300
- Recycle Time (Full): A: 2.5 sec. Ni-MH: 1.9 sec.
- Colour Temperature: 5600K
- Colour Temperature w/ Diffuser: 5250K
- Depth Rating: 75m / 250ft
- Dimensions (WxHxD): 7.5cm x 11.1cm x 12.9cm / 3.0in x 4.4in x 5.1in
- Weight: 441g / 14.7oz (without batteries) * Fixing bolt attached
- Underwater Weight: Approx. +60g / 0.35oz (with batteries)
Key Features
- DS-TTL II circuitry adjusts the light intensity automatically based on your camera’s onboard flash.
- Intuitive light level control for adjusting the intensity, allowing easy light manipulation for various conditions.
- Increased light intensity from the target light—40% stronger than previous models—helping to better visualise the strobe’s position.
- Exclusive prism lens delivers a wide 100° x 100° beam angle with ideal flat light distribution, even without the diffuser.
- With the diffuser, the beam angle expands to 110° x 110° and softens the light for more evenly exposed images.
- Pre-flash cancel mode, designed to eliminate pre-flash interference from your camera.
- Customisable light level control with 10 steps, allowing precise adjustments of the Guide Number (GN) from 1 to 20.
- DS-TTL II function for flawless automatic exposure.
- Auto power-off function for energy efficiency.
- Sync cord: Fibre-Optic Cable (required for use).
- Over-pressure relief valve to ensure safe operation under water.
- LED target light for improved strobe positioning.
Important Notes
- A Fibre-Optic Cable is required when using the YS-01 strobe.
- If using the YS-01 with a non-SEA&SEA housing, a Strobe Mask Set may be needed along with the Fibre-Optic Cable.
- For optimal performance, always use genuine SEA&SEA Fibre-Optic Cables. Non-recommended cables may cause issues, especially with TTL auto exposure.
- CAUTION: Do not use non-recommended batteries (such as lithium primary batteries). These can cause battery leakage, overheating, and may even cause the strobe to rupture, leading to personal injury.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
SEA&SEA YS-01 Solis Strobe
The SEA&SEA YS-01 Solis Strobe, the best-selling strobe in its class, has been redesigned to offer improved performance. Featuring DS-TTL II circuitry, this strobe automatically adjusts the light intensity based on the light output from the camera’s onboard flash. With this function, even an inexperienced underwater photographer can intuitively control the desired light level. The strobe also allows you to adjust the light intensity from the programmed standard exposure, making it easy to fine-tune the lighting for your specific needs.
Product Specifications
- Guide Number (ISO 100/m) (land): 20
- Beam Angle: 100° x 100° (with diffuser 110° x 110°)
- Batteries: 4xAA A: 6V Ni-MH: 4.8V
- Number of Flashes: A: 230 Ni-MH (2500mAh): 300
- Recycle Time (Full): A: 2.5 sec. Ni-MH: 1.9 sec.
- Colour Temperature: 5600K
- Colour Temperature w/ Diffuser: 5250K
- Depth Rating: 75m / 250ft
- Dimensions (WxHxD): 7.5cm x 11.1cm x 12.9cm / 3.0in x 4.4in x 5.1in
- Weight: 441g / 14.7oz (without batteries) * Fixing bolt attached
- Underwater Weight: Approx. +60g / 0.35oz (with batteries)
Key Features
- DS-TTL II circuitry adjusts the light intensity automatically based on your camera’s onboard flash.
- Intuitive light level control for adjusting the intensity, allowing easy light manipulation for various conditions.
- Increased light intensity from the target light—40% stronger than previous models—helping to better visualise the strobe’s position.
- Exclusive prism lens delivers a wide 100° x 100° beam angle with ideal flat light distribution, even without the diffuser.
- With the diffuser, the beam angle expands to 110° x 110° and softens the light for more evenly exposed images.
- Pre-flash cancel mode, designed to eliminate pre-flash interference from your camera.
- Customisable light level control with 10 steps, allowing precise adjustments of the Guide Number (GN) from 1 to 20.
- DS-TTL II function for flawless automatic exposure.
- Auto power-off function for energy efficiency.
- Sync cord: Fibre-Optic Cable (required for use).
- Over-pressure relief valve to ensure safe operation under water.
- LED target light for improved strobe positioning.
Important Notes
- A Fibre-Optic Cable is required when using the YS-01 strobe.
- If using the YS-01 with a non-SEA&SEA housing, a Strobe Mask Set may be needed along with the Fibre-Optic Cable.
- For optimal performance, always use genuine SEA&SEA Fibre-Optic Cables. Non-recommended cables may cause issues, especially with TTL auto exposure.
- CAUTION: Do not use non-recommended batteries (such as lithium primary batteries). These can cause battery leakage, overheating, and may even cause the strobe to rupture, leading to personal injury.
